HOW USE THE USB PORT Freematics OBD-II UART Adapter V2

Inquiry and support for Freematics products
Post Reply
machasoftware
Posts: 1
Joined: Fri Mar 17, 2017 11:23 pm

HOW USE THE USB PORT Freematics OBD-II UART Adapter V2

Post by machasoftware »

Hi Stanley Huang and Kevin Huang, I have a new OBD II adapter for Arduino and I wonder:
1. How to use the usb port?Please illustrate.
2. What is the use of connecting the USB port to my computer? Please illustrate.
3. Do you have software to use the USB port?Please illustrate.
4. What is additional functionality the USB port?Please illustrate.
steveb
Posts: 1
Joined: Fri Apr 14, 2017 6:23 am

Re: HOW USE THE USB PORT Freematics OBD-II UART Adapter V2

Post by steveb »

I have the same question. Just received a Freematics ONE and am trying to get some data from it in its out of box state. I hooked up a laptop running TeraTerm to the USB port on the adapter,, and all it does is wakes up, checks a few things and shuts down. I was expecting to see some PIDs coming up on the screen, but nothing. What am I doing wrong? Thanks
fredrikj
Posts: 1
Joined: Sun Oct 08, 2017 6:57 pm

Re: HOW USE THE USB PORT Freematics OBD-II UART Adapter V2

Post by fredrikj »

I'm also wondering this.
Installed the CH340 driver and under the assumption that it uses the ELM327 tried connecting to a Volvo V50 2005 with "Freediag 1.08" and "OBD Auto Doctor" without success. Serial over USB looks like it's working but neither software can connect to ELM.
stanley
Site Admin
Posts: 1018
Joined: Sat Mar 01, 2014 3:15 am

Re: HOW USE THE USB PORT Freematics OBD-II UART Adapter V2

Post by stanley »

The baudrate is 115200bps instead of 38400bps for ELM327.
gospod
Posts: 7
Joined: Thu Oct 26, 2017 6:39 am

Re: HOW USE THE USB PORT Freematics OBD-II UART Adapter V2

Post by gospod »

Does anybody successfully connect with Mac?
Post Reply