.csv file not loading on google earth

Technical support for Telematics Kits
Questions and discussions about MegaLogger and NanoLogger sketches
Logan700
Posts: 5
Joined: Tue Jan 24, 2017 11:57 am

.csv file not loading on google earth

Postby Logan700 » Thu Mar 16, 2017 3:36 am

Hello guys,
I am new to the Freematics data logging system, and I have a quick question as to how I plot my collected GPS data. I have gone on a few short drives and logged the data on an SD card. Once I was done I loaded it on to my computer and tried to plot it on Google Earth through the Freematics website, but it did not work. Any ideas as to how I should get it to work?

protomor
Posts: 67
Joined: Wed Oct 14, 2015 9:17 am

Re: .csv file not loading on google earth

Postby protomor » Thu Mar 16, 2017 4:27 am

Can you send me a copy of your outputted CSV?

Logan700
Posts: 5
Joined: Tue Jan 24, 2017 11:57 am

Re: .csv file not loading on google earth

Postby Logan700 » Thu Mar 16, 2017 11:36 am

Yes, here you go.
https://drive.google.com/file/d/0B2t5bx ... sp=sharing
This is a link to the file on Goole Drive.

protomor
Posts: 67
Joined: Wed Oct 14, 2015 9:17 am

Re: .csv file not loading on google earth

Postby protomor » Thu Mar 16, 2017 11:58 am

You must be boosted. lol.

Here, try my log viewer: https://drive.google.com/file/d/0ByBda7 ... sp=sharing

Just file open, find your csv, and go play. Let me know if you have questions.

Logan700
Posts: 5
Joined: Tue Jan 24, 2017 11:57 am

Re: .csv file not loading on google earth

Postby Logan700 » Thu Mar 16, 2017 12:57 pm

Ok thanks. I downloaded your viewer to my computer, and I opened up the GinzoLogViewer.exe file. I then tried to drag and drop my .csv file to it, but it did not work. It could be because I am working from a Mac. If that is the problem, what should I do? I don't have a Windows computer readily available to me.

protomor
Posts: 67
Joined: Wed Oct 14, 2015 9:17 am

Re: .csv file not loading on google earth

Postby protomor » Thu Mar 16, 2017 9:26 pm

Does the main screen actually load when you open it? I'm surprised it even got that far on a mac!

Drag+drop doesn't work (I should add that to my list of features). You need to go to "File" then "open" in the top left task area. I'm not sure if Macs will read that properly though. I'm a Microsoft developer so windows is really the only thing I do. I did verify your CSV opens in my software though.

Logan700
Posts: 5
Joined: Tue Jan 24, 2017 11:57 am

Re: .csv file not loading on google earth

Postby Logan700 » Fri Mar 17, 2017 3:30 am

Yeah the main screen actually loads! But after that, it's a bit rough. I'll try what you said when I get home from school. Were you able to see if my .csv was plotable on Google Earth?

protomor
Posts: 67
Joined: Wed Oct 14, 2015 9:17 am

Re: .csv file not loading on google earth

Postby protomor » Fri Mar 17, 2017 4:17 am

Yea. I know where you live now lol. Must be warm. Although your temps make me think you're around 50F at the time of the log.

My log parser still needs some work but you can get a general idea. I hope it's intuitive enough to figure out. I think that if you have to make documentation, your software is bad lol.

When your log first loads, it'll show you the RPM graph up top and the first accelerometer number in the google earth plot. Just check the boxes for what you want.

Let me know how good the food is at Cocina del Charro.


Return to “Telematics Kits (Arduino Compatible)”

Who is online

Users browsing this forum: No registered users and 1 guest