Search found 932 matches

by stanley
Mon Oct 11, 2021 12:23 pm
Forum: Freematics Products
Topic: ONE+ GNSS Internal Traccar
Replies: 1
Views: 1436

Re: ONE+ GNSS Internal Traccar

This code is deprecated and not suitable for ONE+ Model B. Please use telelogger instead.
by stanley
Mon Oct 11, 2021 12:21 pm
Forum: Freematics Products
Topic: ISO 9141-2 not compatible, not supported (G1 Honda Insight)
Replies: 2
Views: 1647

Re: ISO 9141-2 not compatible, not supported (G1 Honda Insight)

Since you already get a response from 010C, you can try bypassing checking result of init(). Let me know if this works for you.
by stanley
Fri Oct 01, 2021 11:28 am
Forum: Freematics Products
Topic: HowTo get hardware configuration from One+
Replies: 1
Views: 1486

Re: HowTo get hardware configuration from One+

Did you use Freematics Builder? Make sure after loading telelogger, you choose the correct type of GNSS. There are 3 options, internal, external and cellular. Also make sure to change CPU clock to 160Mhz.
by stanley
Wed Sep 29, 2021 10:47 pm
Forum: Freematics Products
Topic: Are key bytes in the wrong order for ISO14230-4/KWP2000 Fast?
Replies: 3
Views: 1837

Re: Are key bytes in the wrong order for ISO14230-4/KWP2000 Fast?

This is a known bug in the earlier firmware. We will soon release a firmware update for users to upgrade.
by stanley
Wed Sep 29, 2021 9:16 pm
Forum: Freematics Software
Topic: SAE J1939 NOT READ
Replies: 4
Views: 2831

Re: SAE J1939 NOT READ

Fuso canter does not use J1939 as far as I know.
by stanley
Sun Sep 26, 2021 10:40 pm
Forum: Freematics Products
Topic: Possible reason for ONE+ (H) to stop sending data
Replies: 9
Views: 2447

Re: Possible reason for ONE+ (H) to stop sending data

Is it possible for you to retrieve serial output before hanging up?
by stanley
Sat Sep 25, 2021 6:24 pm
Forum: Freematics Software
Topic: SAE J1939 NOT READ
Replies: 4
Views: 2831

Re: SAE J1939 NOT READ

Which make of trucks have you tested on?
by stanley
Thu Sep 23, 2021 11:37 am
Forum: Freematics Products
Topic: model H not read j1939 protocol
Replies: 3
Views: 1675

Re: model H not read j1939 protocol

I see you have modified the FreematicsOBD.cpp and added some code. Please use the original. Please don't think you are working with ELM327 although it appears to be. Also we have stated on the product page that only broadcast traffic of J1939 can be obtained.
by stanley
Thu Sep 23, 2021 11:31 am
Forum: Freematics Products
Topic: Possible reason for ONE+ (H) to stop sending data
Replies: 9
Views: 2447

Re: Possible reason for ONE+ (H) to stop sending data

Please enable RESET_AFTER_WAKEUP in case there is lockup issue.