Reading VIN

Inquiry and support for Freematics products
Post Reply
brettw
Posts: 1
Joined: Wed Jul 05, 2017 8:15 pm

Reading VIN

Post by brettw »

Hi,
I'm trying to pull the VIN from the OBD-II Emulator MK2. I get no response at all for this request. My code is running on an in-vehicle PC with a dedicated OBD-II SDK. The vendor tells me the problem is the time they pause before sending the next flow control frame. They delay for 400us. In testing they just tried 1.1ms instead, and now it works.
Reading ISO 15765-2, the timeout for N_Bs is 1000ms. Is there a recommended minimum? Can anyone advise?
DinaHaines
Posts: 1
Joined: Sat Jul 22, 2017 8:45 pm

Re: Reading VIN

Post by DinaHaines »

I was also not able to get VIN number response. We were getting VIN number from some of the cars but not from all . Then after we came to know that every car manufacturer doesn't provide support for VIN number.
jennygunn
Posts: 1
Joined: Thu Sep 21, 2017 9:51 pm

Re: Reading VIN

Post by jennygunn »

I can utilize various numbers (1.00-2.00x) as long as I modify how close I hold my book http://www.assignmentdone.co.uk/buy-ass ... -online-uk. I'm thinking about whether this is valid for each kind of eye that needs a per user, and what remove is generally utilized by eye docs to compose a content.
Post Reply