Page 1 of 1

Freematics One Cannot be found by Arduino IDE

Posted: Tue Feb 06, 2018 5:37 am
by crazywizard
Another glad Freematics customer here, just received my Freematics ONE all the way in Kenya!
Unfortunately, it seems that the Arduino IDE does not list any ports for the dongle. I have tried both native(MacOS) IDE and online editor, same issue.

Here is a stub on my USB devices. As you can see, the dongle is connected.

[code]
crazywizard$ system_profiler SPUSBDataType
USB:

USB 3.0 Bus:

Host Controller Driver: AppleUSBXHCILPTH
PCI Device ID: 0x8c31
PCI Revision ID: 0x0005
PCI Vendor ID: 0x8086

Card Reader:

Product ID: 0x8406
Vendor ID: 0x05ac (Apple Inc.)
Version: 8.20
Serial Number: 000000000820
Speed: Up to 5 Gb/sec
Manufacturer: Apple
Location ID: 0x14700000 / 10
Current Available (mA): 1800
Current Required (mA): 224
Extra Operating Current (mA): 0
Built-In: Yes

Apple Internal Keyboard / Trackpad:

Product ID: 0x0274
Vendor ID: 0x05ac (Apple Inc.)
Version: 6.24
Serial Number: D3H5524D8V1FTV4AB4PS
Speed: Up to 12 Mb/sec
Manufacturer: Apple Inc.
Location ID: 0x14400000 / 3
Current Available (mA): 1000
Current Required (mA): 500
Extra Operating Current (mA): 0
Built-In: Yes

Bluetooth USB Host Controller:

Product ID: 0x8290
Vendor ID: 0x05ac (Apple Inc.)
Version: 1.19
Speed: Up to 12 Mb/sec
Manufacturer: Broadcom Corp.
Location ID: 0x14300000 / 2
Current Available (mA): 1000
Current Required (mA): 0
Extra Operating Current (mA): 0
Built-In: Yes

CP2102 USB to UART Bridge Controller:

Product ID: 0xea60
Vendor ID: 0x10c4 (Silicon Laboratories, Inc.)
Version: 1.00
Serial Number: 0001
Speed: Up to 12 Mb/sec
Manufacturer: Silicon Labs
Location ID: 0x14100000 / 14
Current Available (mA): 1000
Current Required (mA): 100
Extra Operating Current (mA): 0
[/code]

Re: Freematics One Cannot be found by Arduino IDE

Posted: Tue Feb 13, 2018 8:49 pm
by stanley
The last one is the device. You may need to install CP2102 USB driver.
https://www.silabs.com/products/develop ... cp-drivers