MegaLoggerHD not running beyond initialisation

Inquiry and support for Freematics products
Post Reply
darren
Posts: 1
Joined: Wed Apr 11, 2018 1:19 pm

MegaLoggerHD not running beyond initialisation

Post by darren »

I am running the MegaLoggerHD with an OBD-II Emulator MK2 and OBD-II UART Adapter V2.1, using the Mega 2560 Wemos board (with the Freematics MEGA Kit). The OBD-II Adapter is connected to Serial 1 port on the Telematics LCD shield. I am unable to get the logger up and running and instead get the following output on the display:

MEGA LOGGER HD - OBD-II/GPS/MEMS

SDHC 15200MB
File ID: 14
Adapter Ver. 0.0
MEMS X

Sending ATZ
Timeout
Sending ATL1
Timeout
Sending ATRV
Timeout
Sending 0100
Timeout
Sending 0902
Timeout

Any suggestions as to why I am not getting any further than this appreciated.

Thanks,
Darren
stanley
Site Admin
Posts: 1018
Joined: Sat Mar 01, 2014 3:15 am

Re: MegaLoggerHD not running beyond initialisation

Post by stanley »

You are using outdated source code. Please grab the latest code from github.
https://github.com/stanleyhuangyc/ArduinoOBD
Post Reply