Freematics One+ B - OBD hex

Inquiry and support for Freematics products
Post Reply
botts
Posts: 2
Joined: Sat Jul 10, 2021 4:08 pm

Freematics One+ B - OBD hex

Post by botts »

Hi,

I have my Freematics One+ B up and running and I get GPS coordinates to my traccar server. But no/limited OBD data.

The hex for the GPS comes in and is decoded fine, but not sure what the below is and not sure why I am getting no other OBD data.

In Hex decoder I get the following:

[device_id]#EV=2,TS=80580,ID=[device id],VIN=[cars vin],*1B

device id and vin are correct. (redacted)

not sure what EV,TS or the *1B are?

or why no pid data is coming through. PID data is avaliable in the CSV files on the SD card

I have verified with an elm327 that the PIDS are being read and are correct via the torque app with the elm327

Any ideas?
stanley
Site Admin
Posts: 1018
Joined: Sat Mar 01, 2014 3:15 am

Re: Freematics One+ B - OBD hex

Post by stanley »

Post Reply