changing the ECU response ID's in OBD

Inquiry and support for Freematics products
Post Reply
JulieD
Posts: 1
Joined: Sat Feb 25, 2023 8:42 am

changing the ECU response ID's in OBD

Post by JulieD »

How do I change the ECU response ID in CAN 11-bit protocol? My simulator is responding with 0x7e8. I would like to be able to change it to ID's from 0x7e8 to 0x7ef. Are these ID's configurable?
seb
Posts: 12
Joined: Sat Oct 01, 2022 2:34 am

Re: changing the ECU response ID's in OBD

Post by seb »

Would also be interested in this, as it is the same in my EV.
adamusa
Posts: 1
Joined: Thu Aug 17, 2023 11:26 am

Re: changing the ECU response ID's in OBD

Post by adamusa »

In the CAN (Controller Area Network) protocol, devices exchange information through CAN messages. Each CAN message includes an ID on 11 bits (in CAN 2.0A version). The ID of the message determines the priority and how the message should be handled in the CAN network. mapquest directions
Post Reply