OBD-II Emulator precision of the Speed Control

Inquiry and support for Freematics products
Post Reply
Roberto
Posts: 3
Joined: Thu Jun 26, 2014 6:24 pm

OBD-II Emulator precision of the Speed Control

Post by Roberto »

Hello,
I would like to know the value range and precision for the Engine RPM control.
I need to be able to set the RPM in steps of 10 RPM and even more important, the RPM has to be stable at the set value.
Thanks
stanley
Site Admin
Posts: 1018
Joined: Sat Mar 01, 2014 3:15 am

Re: OBD-II Emulator precision of the Speed Control

Post by stanley »

You may be interested in our next version of the OBD-II emulator, which has a GUI on PC and iPad. It will be released shortly.
Roberto
Posts: 3
Joined: Thu Jun 26, 2014 6:24 pm

Re: OBD-II Emulator precision of the Speed Control

Post by Roberto »

Haello Stanley,

The advantage of your current solution is that there is no PC or any other additional hardware or software required and easy to use, which is exactly what I need.
Could give me the specifications of the current solution? Value range of the engine RPM control and precision?
ablock
Posts: 4
Joined: Wed Jun 25, 2014 12:10 am

Re: OBD-II Emulator precision of the Speed Control

Post by ablock »

Stanley,

Did you get my forum post? I need instructions on how to use the current version of the emulator via Serial.
stanley
Site Admin
Posts: 1018
Joined: Sat Mar 01, 2014 3:15 am

Re: OBD-II Emulator precision of the Speed Control

Post by stanley »

The serial interface of the current emulator is only used to altering the protocol that the emulator uses. The commands can be found in the product description.
ablock
Posts: 4
Joined: Wed Jun 25, 2014 12:10 am

Re: OBD-II Emulator precision of the Speed Control

Post by ablock »

Ok, so how can I have the ignition turn on, vin display through the port and so on? Do I have to reprogram the device?
ablock
Posts: 4
Joined: Wed Jun 25, 2014 12:10 am

Re: OBD-II Emulator precision of the Speed Control

Post by ablock »

How are you supposed to use the emulator then? I need some instructions ASAP.
stanley
Site Admin
Posts: 1018
Joined: Sat Mar 01, 2014 3:15 am

Re: OBD-II Emulator precision of the Speed Control

Post by stanley »

You cannot adjust by 10RPM with current version of emulator. Only the new version (with software GUI) allows you to do this. The current physical knob controlled version is adjusted by about 100rpm. The range is 0-16000rpm. For ranges of all OBD-II PIDs, please refer to this.
ablock
Posts: 4
Joined: Wed Jun 25, 2014 12:10 am

Re: OBD-II Emulator precision of the Speed Control

Post by ablock »

Where can I buy this device?
stanley
Site Admin
Posts: 1018
Joined: Sat Mar 01, 2014 3:15 am

Re: OBD-II Emulator precision of the Speed Control

Post by stanley »

The new version will be released pretty soon (next week) in our online store. You can also keep an eye on our blog.
Post Reply