Page 1 of 1

sending alarms from feematics one+

Posted: Tue Sep 05, 2017 4:50 am
by nico2002
I would like to design a system that send alarms (SMS) to a tablet , smartphone or PC , for example: when a vehicle exceeds the limits of velocity, the vehicle go out of the authorized zones , the fuel is low , the doors open, the lights stay on ,etc.
Additionally ,it must to save all information of vehicle , show the geographical position in real time and get more useful information.
Is possible to design a software using the freematics one + for this application?
In my country (Ecuador) there is not vehicle telematics yet and I believe would be a good idea to have one for several markets.
thank you

Re: sending alarms from feematics one+

Posted: Thu Sep 07, 2017 12:02 am
by stanley
Except for door status, all other functions you mentioned can be done. You can send SMS with SIM800 GSM module.

Re: sending alarms from feematics one+

Posted: Sun Sep 10, 2017 6:27 am
by nico2002
thanks

Is possible to work with both systems ;ie, freematics hub software and sms (send and receive) ? Does it will not cause conflicts in the device operation?

Re: sending alarms from feematics one+

Posted: Sat Jul 21, 2018 4:58 pm
by Effeci
Iam interested too. But what happen if the unit is disconnected from the odb port? It doesnot have a battery. Then?
Thank you
Fausto

Re: sending alarms from feematics one+

Posted: Mon Sep 09, 2019 7:09 am
by drlynass
I am also intresed to see if some one can share their code to do this. Thanks
drlynass