PROBLEMS WITH NEW FREEMATICS OBD ADAPTER V2

Discussion about software developed by Freematics, including Freematics Builder and Freematics Emulator GUI
Post Reply
JesseVoss
Posts: 1
Joined: Thu Jun 21, 2018 12:14 am

PROBLEMS WITH NEW FREEMATICS OBD ADAPTER V2

Post by JesseVoss »

Hi,

Got my adapter yesterday, but the logging doesn't work reliably, it stops after about 2minutes of recording (according to LED flashing) and will not resume until I replug it and the data seems to have incorrectly formated GPS values so neither data2kml nor the charting service can use it.I get F020/10C and occaisonally 10B/10D/10E like in the sample from data2kml.But no other F-values instead I have $GPGGA/$GPRMC/$GPVTG that after some time seem to contain GPS locations.But my main proplem is the usbasp I got with my order, I have installed the fischl drivers, but avrdude always complains "avrdude.exe: warning: cannot set sck period. please check for usbasp firmware update." sometimes it gives more information like target not responding and stuff like that. Also the Arduino Builder seems to use 644p when build target is Freematics, but its a 328p.

Please help.

I didn't find the right solution from the Internet.

References:-
https://www.dfrobot.com/forum/viewtopic.php?t=1096
<a href="https://jobs.vidzzy.com/hire-motion-graphics-video-animation-studio/">motion graphics video quote</a>

Thanks!
Post Reply