traccar_client_sim5360 for the 7600 chipset

Discussion about software developed by Freematics, including Freematics Hub, Freematics Builder, Freematics Emulator GUI
Posts: 1
Joined: Thu May 09, 2019 1:18 pm

traccar_client_sim5360 for the 7600 chipset

Postby michaelv » Thu May 09, 2019 1:21 pm

Hi guys,

Im setting up my device -
I've had some issues with the sim module. I believe I have the 7600 chipset as I can get that to work, but not the 5360.

Is there a version of the traccar_client_sim firmware for the 7600 chipset or a way I can convert the 5360?


Posts: 3
Joined: Tue Jun 18, 2019 4:16 pm

Re: traccar_client_sim5360 for the 7600 chipset

Postby HeleneN » Tue Jun 25, 2019 9:45 pm

I am also trying to convert this code to SIM7600, but am struggling.

Really wish there was a way to test the at+ commands on the commandline or one of the many utilities out there.

Figuring out how the at-commands are supposed to work when it all have to be tested through compiled code is a really slow process.
Helene N

Return to “Freematics Software”

Who is online

Users browsing this forum: No registered users and 12 guests