Freematics One + not connecting via NET_SIM7600

Discussion about software developed by Freematics, including Freematics Builder and Freematics Emulator GUI
Post Reply
daveywatt
Posts: 23
Joined: Fri Jun 26, 2020 10:11 pm

Freematics One + not connecting via NET_SIM7600

Post by daveywatt »

I have purchased a new Telstra data SIM which has since been activated, however my Freematics One + won't establish a connection no matter what settings I try...

The sim is on a data only plan, and I have set the following:

Code: Select all

#define NET_DEVICE NET_SIM7600
#define CELL_APN "telstra.iph"
#define SIM_CARD_PIN "XXXX"
The other settings are set to connect to hub.freematics.com via UDP and nothing else has changed in the code.
The hub never registers any connection data.

This is what appears in the console after an upload:

Code: Select all

CPU:240MHz FLASH:4MB
IRAM:359KB
DEVICE ID:XXXXXX
TYPE:16
MEMS:ICM-20948
ACC BIAS:-0.00/-0.03/0.85
GNSS:OK
OBD:NO
STANDBY
ACC BIAS:-0.00/-0.04/1.03
CELL:SIM7600E
IMEI:XXXXXXXXXXXX
NO SERVICE,Online
SIM7600E OFF
GNSS OFF
Any help would be appreciated.
daveywatt
Posts: 23
Joined: Fri Jun 26, 2020 10:11 pm

Re: Freematics One + not connecting via NET_SIM7600

Post by daveywatt »

This has been resolved.

Not sure what the issue was, but setting the config back to NET_WIFI and then reverting to NET_SIM7600 seems to have fixed it.

Could of been a strange SIM related issue...
Hickory1966
Posts: 1
Joined: Thu Oct 08, 2020 8:12 pm

Re: Freematics One + not connecting via NET_SIM7600

Post by Hickory1966 »

Hi. Such difficulties do arise periodically. I sometimes have to reboot the device. For example, I recently played at new no deposit casino mobile and the Internet disappeared altogether and I could not connect in any way. After the reboot, everything continued to work further. I think that this is just a malfunction of the equipment.
Post Reply