Standby mode and motion triggered wakeup

Inquiry and support for Freematics products
Site Admin
Posts: 744
Joined: Sat Mar 01, 2014 3:15 am

Standby mode and motion triggered wakeup

Postby stanley » Tue Dec 06, 2016 12:54 am

Freematics ONE is able to work in a low power mode in which the working current is as low as 10mA. The main controller ATmega328p can still be active and access MEMS sensor, BLE or microSD. Instead of checking OBD to detect ignition being switched back on, we can do motion detection by periodically checking MEMS sensor to wake up the whole device (OBD, GPS, GSM/WIFI) when the car starts to move. This allows maximize power saving so that the car battery won't go flat for months. The latest revision of sample sketches (datalogger and telelogger) in Github demonstrate this approach. ... irmware_v4

The motion threshold in config.h can be adjusted to your own flavor. I have done a couple of tests these days and it proves this works quite well. Comparing with repeatedly request OBD PID to trigger wake up, this is much more power efficient.

Posts: 7
Joined: Thu Oct 26, 2017 6:39 am

Re: Standby mode and motion triggered wakeup

Postby gospod » Thu Dec 07, 2017 10:27 pm

Could you please share example?
How could got it working with OBD-II UART Adapter V2 (for Arduino)?

Return to “Freematics Products”

Who is online

Users browsing this forum: Majestic-12 [Bot] and 7 guests