SD card is empty?

Discussion about Freematics software, including Freematics Emulator GUI software, Freematics Arduino Builder etc.
Posts: 2
Joined: Sat Jan 13, 2018 11:04 am

SD card is empty?

Postby idodds » Sat Jan 13, 2018 11:06 am

Freematics ONE+ arrived today. Loaded the datalogger sketch (V5). File is created on the SD card but no data is written.
Read through the forum and can't find a solution.
Please advise........

Posts: 1
Joined: Wed Jun 13, 2018 12:16 pm

Re: SD card is empty?

Postby kirax105 » Wed Jun 13, 2018 12:24 pm

I had a similar problem. From my experience with my device... take it for what it is, not sure how helpful it'll be to others, or it can just might be a user error and I didn't do something right and it just happens that by removing the SIM card this seems to have fixed the "sd card" being empty for me.

The sketch I was using does not have GSM options configured. But the card was in the slot anyway(thinking it wasn't an issue) and essentially what ended up happening was that during the boot process, it never finishes all the validation and just hangs.

Posts: 1
Joined: Fri Jul 20, 2018 6:10 am

Re: SD card is empty?

Postby bean987 » Fri Jul 20, 2018 6:16 am

I have exactly faced the same problem but some people suggest me for ‎ after a visit that my problem has solved now It provides the solution based on the technical issue. if you have any problem then ask your query here.

Return to “Freematics Software”

Who is online

Users browsing this forum: No registered users and 6 guests