Freematics One+ Upload error.

Inquiry and support for Freematics products
zaky
Posts: 1
Joined: Thu Jul 05, 2018 10:49 pm

Freematics One+ Upload error.

Postby zaky » Thu Jul 05, 2018 10:51 pm

Hi,

I am trying to upload SIM5360Test.ino in my newly purchased Freematics One+ using Platform IDE, But I am getting the following error.

esptool.py v2.3.1

Configuring upload protocol...
AVAILABLE: esptool, minimodule, olimex-arm-usb-ocd-h, olimex-arm-usb-tiny-h
CURRENT: upload_protocol = esptool
Looking for upload port...
Auto-detected: COM3
Uploading .pioenvs\esp32dev\firmware.bin
esptool.py v2.3.1
Connecting........_____....._____....._____....._____....._____....._____....._____....._____....._____....._____

A fatal error occurred: Failed to connect to ESP32: Timed out waiting for packet header
*** [upload] Error 2
[ERROR] Took 68.69 seconds

stanley
Site Admin
Posts: 695
Joined: Sat Mar 01, 2014 3:15 am

Re: Freematics One+ Upload error.

Postby stanley » Wed Jul 11, 2018 10:29 pm

Connect the unit to OBD port, or, connect USB to a USB hub with external power supply. Your computer may not be able to supply enough current surge.

danfc9
Posts: 1
Joined: Tue Jul 24, 2018 10:54 pm

Re: Freematics One+ Upload error.

Postby danfc9 » Tue Jul 24, 2018 10:55 pm

I am having the same issue.

I have tried different USB ports and cables, and tried plugging it directly into a vehicle with a known working OBD-2 port.

What other options are there to get this device to work?

alecg
Posts: 2
Joined: Fri Feb 09, 2018 5:09 pm

Re: Freematics One+ Upload error.

Postby alecg » Mon Aug 06, 2018 7:00 pm

Connect the unit to OBD port

stanley
Site Admin
Posts: 695
Joined: Sat Mar 01, 2014 3:15 am

Re: Freematics One+ Upload error.

Postby stanley » Tue Aug 07, 2018 12:11 pm

Alternatively, use a USB hub with external power input.


Return to “Freematics Products”

Who is online

Users browsing this forum: No registered users and 7 guests